What is the flow rate of the toilet bowl Toto Drake, which is the “water surface area”

0
891

Toto drake elongated toilet, Toto drake elongated, Toto drake toilet

Should the area of the water cistern be as large as possible? When buying a toilet bowl, do you really pay attention to these details? When trash sticks to the bowl, there is a little water stain and, of course, an odor.

Not surprisingly, the United States is the only country whose toilet specifications specify the size of a water barrel.

But is that the only thing that matters? Even if the size of the water bowl is great, there are other things to be aware of. We need to understand some details, such as filling the bowl after flushing or its function as a sewer gas barrier.

Toto drake

You just need to know that after rinsing, the bowl from the tank will fill with water. All Americans’ favorite siphon toilet will be used in all aspects of this discussion. After all, flush-and-backflush toilets don’t have a big water barrel.

If the drain is not blocked, the water will never rise to the edge of the toilet bowl during flushing. Thus, after rinsing, the water from the water tank will flow into the bowl. The remaining water will eventually stop at the spillway in the bowl.

It’s time to determine the water barrel and its area.

In the bathroom specification, the area of a water barrel is always expressed as height, length and width, and we can help you visualize the size and shape of the water barrel.

But not all toilets display this information on the data sheet. So it can be a little frustrating when you need it for comparison or to make a purchasing decision. However, you can contact the manufacturer or supplier at any time.

When you check the size of the surface, you will be able to know the height from the edge to the surface. This aspect is more important than the size of the water barrel. If you only want a large toilet bowl, you might overlook other aspects. Especially the height from the edge to the surface of the barrel.

Make sure that the height of the lip is a safe distance from the height of the water. An unusually high water height could mean that the water level in the bowl is higher. This may mean that the space between the water height and the edge of the bowl is narrow. This will bring some inconvenience in using the device.

Rimless toilet

rimless toilet

First, if the water surface is too close to the edge of the bowl, splashing is a common problem. This problem will occur especially for those who have a discreet design if they have a large water barrel area.

Second, the space may be too tight for you to wipe it down. If you have big hands, you run the risk of touching dirty stains in the bowl. So all you have to do is lift your butt off the seat to clean it. Assuming you have strong legs to maintain a half-sitting position until you’re done.

Be sure to pay attention to the distance from the edge to the surface of the water, not just the height of the water in the barrel.

There are no specific standards or best practices as to what type of clearance is appropriate. Your opinion and experience play a huge role here. But if you need a baseball field of at least 5(127mm) inches or more from the water’s edge height is a good criterion. The distance from the seat is at least 6(152mm) inches.

Toilet drain

The spillway is the most important one.

This is because the position of the spillway directly affects almost everything from water flow rate to flushing capacity. Of course, you can’t do without the curves of the water surface. If the overflow is located too high, of course, the water surface will be larger, but the volume of water in the bowl will also be larger. The latter is not economically feasible, because it means more water per flush.

This is because the position of the spillway directly affects almost everything from water flow rate to flushing capacity. Of course, you can’t do without the curves of the water surface. If the overflow is located too high, of course, the water surface will be larger, but the volume of water in the bowl will also be larger. The latter is not economically feasible, because it means more water per flush.

To show you the best experience, toilet engineers are competing to design toilets that use less water, flush more power, and have a fairly large water surface area.

The shape and size of the bowl, the flush valve opening, groove diameter, glossiness of the groove, and the amount of water in the water tank all play an important role in achieving this goal. Only a sloped and well-placed spillway will allow each component to effectively achieve its purpose.

Toto drake dual flush

Toto Drake

The location of the spillway can be easily determined by the appearance of the toilets with an open flush. This information is never specified in the technical specifications of the toilet bowl. It will depend on the design of the bowl and siphon. The next three details will affect the water surface area and rim height. These are just the best characteristics of water surface area, rim height and flush that bathroom designers try to find.

Here is one of the most popular Toto Drake toilets – pictured above, consisting of two parts, depending on the flush volume. This information is extracted from the corresponding model specifications.

As you can see, the flushing capacity is directly proportional to the water surface area. The lower it becomes, the smaller the size of the water surface area.

Now that you’ve seen the relationship between flush capacity and water surface size, does this mean that all toilets will have the same feature: “little water equals little water”?

The Kohler has the largest water surface area in the industry. However, some models have virtually the same water surface area regardless of flushing capacity.

Toto Drake vs Kohler, Kohler

How is that possible?

Kohler

In any case, the fundamental problem still exists. The height of the spillway affects the water level, which in turn determines the amount of water and the surface area in the bowl.

What is needed is creativity, using the laws of physics to create an ingenious design that satisfies your desires and a large water surface.

Toilet manufacturers are obliged to prove their claims. If the information in the catalog more or less corresponds to the actual product. More importantly, the product should work properly, and you will be very happy with it.

When new technology increases the efficiency of toilets several times over, new regulations are sure to catch up. Market forces will determine which products to discard. When time is up, there’s nothing you can do. Or starting to adapt to a small water surface area may be the best course of action.

LEAVE A REPLY

Please enter your comment!
Please enter your name here